MA 570 / MA 590
MA 570 / MA 590 Modern post-bed high-speed seamer for shoe manufacturing
Area of application:
Covers all top-stitching work with single or two needles in the shoe production. Ornamental and assembly seams on classic and sport shoes can be sewn easily and in a top seam quality. The whole range of light to medium-heavy materials is covered here
Special features:
- New high-class design for the shoe industry
- No compressed air required
- 900/83: automatic thread trimmer
- 910/17: automatic roller presser lift (with mechanical intermediate lift)
- 911/37: automatic backtacking device
- Pico-Drive: New concept of integrated drives (Versions: from thread trimmer)
- energy-saving and environmentally-friendly
- 30% higher torque compared to usual drives
Optimized kinematics with new part sets guarantee top sewing results
- Easily adjustable thread trimmer for short thread ends (up to 15/3 syn.)
- Overload clutch for hook protection
- Easily and accurately adjustable needle guard
- A multi-function switch with pre-programmed functions is integrated in the sewing head
- Reverse sewing / intermediate tacking
- Selection of pre-set speed
Sub class and additional equipment:
- -725/04 Edge trimming mechanism, bottom driven
- -900/83 Powerful and reliable thread trimmer (electromagnet control) for thread sizes up to15/3 syn.
- -910/17 Electromagnetically controlled presser foot lift with additional knee lever for intermediate roller presser lift; no compressed air required
- -911/37 Electromagnetically controlled backtacking device with additional hand switch on sewing head for intermediate tacking
- -940/02 Dome-shaped needle plate for MA 571 and MA 591 Standard on machines without a thread trimmer On machines with a thread trimmer, the thread trimming block must be removed. (Loosen only two Allen screws)
| Technical Data: | |
| Stitch type: | 301 (lockstitch) |
| Max sewing speed: | |
| Model A: | 3000 s.p.m. |
| Model B: | 3000 s.p.m. |
| Model C: | 2000 s.p.m. |
| Balance Wheel Ø: | 65 mm |
| Power supply: | 230V, 50 to 60 Hz |
| Working air pressure: | 6 bar |
| Cutting speed: | 2800/min.-1 |
| Roller presser dia.: | Standard: 35 mm Option: 25 mm |
| Net weight of head: | |
| 571: | approx. 46 kg |
| 574: | approx. 51 kg |
| 591: | approx. 47 kg |
| Motor power: | 550 W |
| Needle System: | |
| 751: | 134 LLCR |
| 574: | 134-135 |
| 591: | 134 |
| Clear workspace: | 260 x 290 mm |
| Bedplate dimensions: | 518 x 177 mm |
| Postbed hight: | 180 mm |
| Cardboaerd box measurements: | 82 x 30 x 72 cm |
| Clearance under roller presser: | 7 mm with knee lever 10 mm with automatic presser foot |
| Gross weight (head in carton w/ accessories): | |
| 571: | approx. 54 kg |
| 574: | approx. 59 kg |
| 591: | approx. 55 kg |
This machine is equipped with finger-guard, belt- and take-up lever guards as standard.
|
|
|